PECO EGC FP

An ultra-thin, contactable coating – non-flammable and PFAS-free.

Peco EGC is an ideal, PFAS-free alternative to fluorinated coatings such as Purocoat 17/02!

Peco EGC surface coating is a ready-to-use, clear liquid dissolved in a non-flammable solvent.

The coating creates a surface with good anti-moisture, anti-surface diffusion and anti-corrosion properties. With a low surface energy, liquids such as water, lubricating oils and silicones can drain freely from the surface while the protective film remains intact.

Peco EGC is transparent, smooth and forms a hard protective layer and does not change the color of most substrates. Peco EGC contains UV tracers that allow control of the coating result.

In electronic applications, contacting of metallic contacts is possible despite coating. Test probes can generally be used on all contacts. Masking of contact surfaces is normally not necessary.

Peco EGC is only very slightly electrically conductive in its liquid state and not at all electrically conductive in its dry state, so that even button cells that are loaded with voltage can be coated without any problem.

The use of Peco EGC in the immersion process requires control of the solids concentration.
With a controlled solid concentration, the same layer thickness can always be coated on the electronic components

Typical applications:
▪ Corrosion protection
▪ Electronic assemblies
▪ Anti-fouling
▪ Sensors
▪ Power supplies

Properties:
▪ Prevents corrosion
▪ High lubricity
▪ Low friction coefficient 
▪ Permanently resistant to hard abrasion
▪ Hydrophobic
▪ Oilophobic
▪ Does not migrate
▪ Reduces pollution
▪ Flexible due to thin layer thickness
▪ Durable and excellent resistance to UV light
▪ Non-stick properties – for maximum protection against soot, dust, mud, salt residues, limescale, water stains, and oils
▪ Apply in <10 minutes
▪ Dries very quickly at room temperature
▪ Non-flammable, non-toxic, not a hazardous substance!

Peco EGC offers unrivalled environmental and health properties. The material is free of heavy metals and PFAS, thus meeting the highest standards of safety and sustainability.
REACH and RoHs compliant.
The solvent (92%) consists of a non-flammable, fluorinated liquid. The dried protective layer of Peco EGC does not contain fluorine.

All components of Peco EGC are free of PFAS!